Intec

Intec ColorFlare 2000 Semi-Automatic Toner Laminator and Foiler with 1-Tonne Hydraulic Pressure

  • Intec ColorFlare 2000
  • Intec ColorFlare 2000
Add to cart
  • Free shipping from 300 €*
  • Quick shipping in the whole world
  • Certified technical service Quick support
  • Custom advices & quotes Secured payment

CF2000

Laminate and foil on one machine: the ColorFlare 2000 adds gold, silver, metallic colours or holographic effects wherever your printer laid down toner, with no die or plate.

  • Dual unwind arm: laminate and foil pre-loaded, fewer roll changes.
  • One tonne of hydraulic pressure and an oil-heated chrome roller: clean adhesion, even on solid toner areas.
  • "Burst" separation: the film is micro-perforated at the sheet edge then burst apart; sheets come out separated, with clean edges, ready for cutting.
  • Touch screen: heat, pressure and speed set to suit the film and the media.

More info

Toner lamination and foiling · production

Laminate and foil, on a single machine

One tonne of hydraulic pressure, a dual unwind arm and automatic sheet separation: the ColorFlare 2000 laminates your prints and adds gold, silver or holographic effects, with no plate.

Semi-automatic, up to 22 SRA3 sheets per minute, on your dry-toner digital prints as well as offset.

Request a quoteSee the specifications

Intec ColorFlare 2000 toner laminator and foiler

1 t

of hydraulic pressure

15 m/min

maximum speed

390 × 1,200

mm, maximum format

140 °C

oil-heated roller

Moving up to production

The ColorFlare 2000 combines lamination and toner foiling in one compact machine, built to run job after job.

Dual unwind arm loaded with a laminate and a gold foil

Laminate and foil loaded together

The dual unwind arm takes a laminate and a foil, or several foils: fewer roll changes.

Metallic foil applied to printed sheets

One tonne of pressure

An oil-heated chrome roller and hydraulic pressure: clean adhesion, even on solid toner areas.

Laminated sheets leaving the ColorFlare 2000

Sheets come out separated

“Burst” separation: the film is micro-perforated then burst apart, leaving clean edges ready for cutting.

ColorFlare 2000 control touch screen

Everything set on the screen

Heat, pressure and speed adjusted from the touch screen to suit the film and the media.

What your customers will order

Four families of jobs, each with the Digital-sys products that make it possible.

Printed invitation foiled in gold and silver

Invitations and stationery

Gold and silver on printed patterns, in short personalised runs.

Made with: OKI Pro9431E · hot foils

Laminated and foiled printed cards

Packaging and cartons

Laminated and foiled cartons, then cut and creased to shape.

Made with: Vulcan SC-350 · board up to 400 gsm

Foiled printed invitation

Tickets and invitations

Metallic and holographic effects that stand out, and make copying harder.

Made with: holographic films · Secabo SC30 II

Laminated business cards

Business cards and brochures

Matt, gloss or soft-touch lamination, then spot varnish or foiling.

Made with: OKI Pro9541E · soft-touch laminate

From print to foiled sheet in four steps

No plate, no software: the foil sticks wherever your printer laid down toner.

⎙︎STEP 1 →

You print

On your dry-toner printer, for example an OKI Pro9431E.

◯STEP 2 →

You load the films

Laminate and foil on the dual arm, ready to go.

▶︎STEP 3 →

You feed the sheets

The timing gate advances them with a slight overlap.

✦STEP 4

The sheets come out finished

Laminated or foiled, separated and flat.

Our experts’ view

Overprintable soft-touch, our premium trick!

Laminate with soft-touch, reprint the design on the OKI, then run it through the ColorFlare again with a foil: foiling next to a velvet feel, on the same sheet.

A complete finishing workshop

Pair the ColorFlare 2000 with a cutter such as the Vulcan SC-350: your cartons and cards go from print to finished piece with no outsourcing.

Format and throughput at a glance

The format, to scale

390 × 1,200 mm maximum format

320 × 450 mm an SRA3 sheet

200 × 300 mm minimum format

From SRA4 to covers and long sheets, up to 1,200 mm.

Accepted weight

Minimum 150 gsm

Maximum 400 gsm

Throughput, in sheets per minute

SRA4 44 sheets/min

SRA3 22 sheets/min

380 × 1,200 mm 8 sheets/min

Films and consumables

The films that give your prints their effect, and what completes your workshop.

Film

Laminates

Gloss, matt or soft-touch, corona-treated for overprinting.

Film

Metallic foils

Gold, silver, rose gold, copper, colours, black, white and clear gloss.

Film

Holographic films

Sparkle, crystal, carbon fibre: eye-catching effects.

Advice

Effects swatch book

To choose the effect with your customer before starting the run.

Complete your workshop

OKI Pro9431E printer

The SRA3 dry-toner printer that feeds the ColorFlare.

OKI Pro9541E printer

Clear toner for spot varnish, white for coloured media.

Vulcan SC-350 cutter

Automatic cutting and creasing of your laminated sheets.

Secabo SC30 II cutter

A3 cutting for short runs.

Laminating films and hot foils

All our films online.

All our finishing machines

Cutting, laminating, foiling.

Which ColorFlare for your production?

Desktop, manual feed

ColorFlare 400

240 kg electromechanical pressure, 330 mm width, board up to 350 gsm.

Semi-automatic production

ColorFlare 2000

One tonne of hydraulic pressure, dual arm, sheets up to 1,200 mm.

Automatic production

ColorFlare 2500 Pro

Same base, with a 1,400-sheet automatic feeder.

Key specifications

The essentials for lamination and foiling. Source: Intec CF2000 brochure (V2).

Formats from 200 × 300 mm to 390 × 1,200 mm
Weight 150 to 400 gsm
Speed 1 to 15 m/min; 22 SRA3 or 44 SRA4 sheets per minute
Pressure hydraulic, 1 tonne (970 kg measured)
Heating oil-heated chrome roller, up to 140 °C
Films dual unwind arm, 3″ (76 mm) cores, premium flaring roller, foil rewinder
Sheet feeding semi-automatic, timing gate with overlap; “burst” separation
Equipment touch screen, built-in compressor, de-curl bar, outfeed cooling fans, fold-away tray
Footprint 643 × 760 × 1,136 mm (W × D × H), 210 kg
Power supply 220-240 V, 50/60 Hz, 3,500 W

The foil only sticks to toner: your print file is all you need, with no plate or die. Full data sheet on request.

Foiled printed invitation

Why choose Digital-sys?

A machine has to be chosen, installed and mastered: we stay by your side at every step.

✓

Pre-sales advice

ColorFlare 400, 2000 or 2500 Pro: the model chosen according to your volumes.

⚙︎

Installation and onboarding

Machine set up, first runs laminated and foiled with you.

★

Tests on your media

Your prints and papers tested before you commit.

☎︎

Local support

Laminates, foils and papers in stock, and a team that knows the whole workflow.

Your prints, laminated and foiled in-house

Tell us about your jobs and volumes: we will propose the right ColorFlare and its pricing.

Request a quote

Photos are not contractual.

Reviews

You must log in to give a review

Log in

A unique experience

We are committed to offering you secure and customizable browsing. We use cookies for this purpose to provide you with offers tailored to your areas of interest, anonymously collect statistical data and make your visit as pleasant as possible. Google may use your personal data and cookies to personalize its advertisements