Nos produits
1070 products
-
The flagship of Intec's sheet-fed cutters: a triple tool head with a passive knife and two opposing tangential creasing wheels (male above, female below) delivering up to 2.5 kg. Board up to 450 micron is creased as with a traditional cutting die, then cut to shape. Sheets from 279 × 400 to 520 × 740 mm, automatic feeder, QR code reading, Held mode. Supplied with ColorCut Pro 5.
-
The wide version of the SC7100 Pro-T: sheets up to 520 mm wide (B2), 1,000-sheet automatic feeder, dual tool head with passive knife and 2.5 kg tangential creasing wheel. Cutting, creasing, kiss-cutting and perforating on board up to 450 micron, QR code reading for mixed jobs, Held mode without a computer. Supplied with ColorCut Pro 5.
-
Automatic sheet-fed cutter with a 1,000-sheet feeder and a dual tool head: passive drag knife and 2.5 kg tangential creasing wheel. It cuts, creases, kiss-cuts and perforates up to 450 micron, reads the QR code on every sheet to run mixed jobs, and works without a computer in Held mode. Format up to 340 × 710 mm, 1,060 mm/s, supplied with ColorCut Pro 5.
-
Compact automatic cutter blending flatbed and sheet-fed technology: 1,000-sheet feeder, dual tool head (blade and creaser, 750 g each), QR code reading for mixed jobs. Cutting, kiss-cutting, creasing and perforating on paper, labels, vinyl and card up to 350 µm, from A4 up to 340 × 710 mm. Mobile, runs from a USB stick, around 100 W average consumption.
-
Automatic production flatbed cutter: 2,100-sheet vacuum feeder (up to 530 × 740 mm) and a five-tool head — two tangential and three passive tools — to cut, crease, perforate and deboss, with up to three operations in one pass. Tangential knife for E, F, G and N fluted board up to 3 mm, rear-side mark reading, next-sheet pre-placement. Packaging runs, corrugated boxes, labels, POS.
-
Automatic flatbed cutter: 2,000-sheet feeder (up to 500 × 720 mm), conveyor belt and next-sheet pre-placement. Cutting, kiss-cutting, perforating and creasing with no cutting die, using a 2.5 kg tangential creasing wheel and a 1.3 kg passive blade. Rear-side mark reading, paper and card up to 800 µm. Packaging runs, labels, POS.
-
B1 flatbed cutting table (media up to 800 × 1,100 mm, 680 × 1,020 mm effective area): cutting, kiss-cutting, perforating, creasing and embossing with no cutting die. Quad tool head including two 2.5 kg tangential tools, fluted board up to 3 mm, ba
-
B2 flatbed cutting table (sheets up to 580 × 800 mm, 545 × 730 mm effective area): cutting, kiss-cutting, perforating and creasing with no cutting die. 2.5 kg tangential creasing wheel, 1,200 mm/s, board up to 800 µm, up to 3 mm with the optional tangential knife. Packaging, gift boxes, POS, labels.
-
-
SRA3 flatbed cutting table (340 × 480 mm effective area): cutting, creasing, perforating and kiss-cutting with no cutting die. Dual 1.2 kg tool head, 1,200 mm/s, media up to 600 µm, camera registration and QR codes. Prototypes, packaging, POS and short-run labels.
-
-
500ml pouch of ESL5 cleaning fluid for Roland MO / LG / LO UV printers
-
Y-shaped hose connector for Roland MO / LG / LO / RC / IO / MG2 / RC / COi UV printers
-
-
-
-
Printhead wiper for Roland VG4 / XP / XG / TY / TYi / LG / LO / RC / MO Series printers
-
Ink cartridge chip reader for Roland AG / MO / LO / LG / IO / MG2 Series
-
-
Ink reservoir cartridge for Roland DG MO / LG / LO / IO / RC Series ink push systems
-
-
-
-
DTF film that turns a plain black print into a metallic silver finish, with no white ink. Soft touch, cold peel, for cotton, polyester, blends, leather and silk. Rolls of 30 or 60 cm × 50 or 100 m, 10 m sample rolls.
-
Water-based latex inks in 750 ml pouches, designed for the TrueVis AG-640. Up to 7 colours (CMYK, orange, red, white) + Optimizer. Dense black, high-opacity white, natural finish, scratch resistance without overcoat.
-
TITAN 170 µm fluorescent print vinyl in 5 shades (yellow, green, red, orange, pink). High-tack solvent acrylic adhesive and micro-channel liner for bubble-free dry application. Rolls of 1370 mm × 25 or 50 m, printable with eco-solvent, latex and UV inks.
-
-
Brighter colors, fewer clogs, better performance — discover the next generation of DTF ink with Color Prime® Chroma.
Compatible with Prestige R2 PRO, XL2, XL3 and XL4 DTF printers. Inks with Oeko Tex Eco Passport.
-
The first latex printer/cutter on the market, 1,625 mm media width (1,600 mm print/cut). Water-based TA2 inks: 7 colours (CMYK, white, orange, red) + Optimizer, or 4 colours + Optimizer. Instant dry, immediate finishing, low odour — dryer and take-up unit included.
-
150 µm white textured PVC vinyl with removable adhesive, for floors, walls and countertops. One-step floor graphic, no lamination: R10 slip resistance, fire class B-s2,d0. Canvas, Sand and Linen finishes — 50.8 cm, 76.2 cm and 137 cm × 30.5 m rolls.
-