Intec

Intec ColorFlare 2500 Pro Automatic Toner Laminator and Foiler with 1,400-Sheet Feeder

  • Intec ColorFlare 2500 Pro
  • Intec ColorFlare 2500 Pro
Add to cart
  • Free shipping from 300 €*
  • Quick shipping in the whole world
  • Certified technical service Quick support
  • Custom advices & quotes Secured payment

CF2500-Pro

Load the stack, the ColorFlare 2500 Pro laminates and foils on its own: the same laminates, foils and holographic films as the other ColorFlare models, fully automated.

  • 1,400-sheet air suction feeder: self-centring guides, automatic registration, adjustable overlap, auto stop for reloading.
  • Dual unwind arm: laminate and foil pre-loaded.
  • Adjustable hydraulic pressure up to one tonne and an energy-saving oil-heated chrome roller.
  • Pneumatic "burst" separation: separated sheets, clean edges, ready for cutting.
  • 7-inch Info-Control touch screen: speed, temperature and feeder.

More info

Toner lamination and foiling · automatic

Load the stack, the ColorFlare laminates and foils on its own

A 1,400-sheet air suction feeder, one tonne of hydraulic pressure and pneumatic separation: the ColorFlare 2500 Pro runs up to 2,000 SRA3 sheets per hour, laminated or foiled, with no dedicated operator.

The production model of the ColorFlare range: the same films and the same effects, fully automated.

Request a quoteSee the specifications

Intec ColorFlare 2500 Pro automatic laminator and foiler

1,400

sheets in the feeder

2,000

SRA3 sheets per hour

1 t

of hydraulic pressure

390 × 715

mm, maximum format

Premium finishing, in volume

The ColorFlare 2500 Pro handles the stack from start to finish: you load it, it laminates or foils, and it stops when it needs reloading.

Front air suction feeder loaded with a stack of sheets

A 1,400-sheet feeder

Dual front air suction, self-centring guides and automatic registration: a 280 mm stack, sheet after sheet.

Dual unwind arm loaded with a laminate and a foil

Laminate and foil loaded together

The dual unwind arm keeps a laminate and a foil ready: switch from one to the other without dismantling anything.

Hydraulic pressure gauges and controls

One tonne, adjustable

Hydraulic pressure up to 970 kg and an oil-heated chrome roller: even adhesion across the whole stack.

ColorFlare 2500 Pro 7-inch Info-Control touch screen

7-inch touch screen

Speed, temperature and feeder set at your fingertips, with the Info-Control interface.

What your customers will order

The same effects as the other ColorFlare models, on longer runs.

Printed invitation foiled in gold and silver

Invitations and stationery

Hundreds of foiled invitations in a single stack, without watching the machine.

Made with: OKI Pro9431E · hot foils

Laminated and foiled printed brochure

Packaging and cartons

Cartons laminated in series, then cut and creased to shape.

Made with: Vulcan SC-350 · board up to 400 gsm

Printed invitation with a metallic effect

Tickets and invitations

Metallic and holographic effects for events, in volume.

Made with: holographic films · Secabo SC30 II

Laminated business cards

Cards, covers and brochures

Matt, gloss or soft-touch lamination of covers and cards, at the pace of your presses.

Made with: OKI Pro9541E · soft-touch laminate

From printed stack to finished stack in four steps

No plate, no software: the foil sticks wherever your printer laid down toner.

⎙︎STEP 1 →

You print

On your dry-toner printer, for example an OKI Pro9431E.

◯STEP 2 →

You load the films

Laminate and foil on the dual arm, ready to go.

▣STEP 3 →

You set down the stack

Up to 1,400 sheets: the feeder aligns them and sets the overlap.

✦STEP 4

The stack comes out finished

Sheets separated by the “burst” system, clean edges, flat.

Our experts’ view

Free up your operator!

On a semi-automatic ColorFlare, someone feeds the sheets. With the 2500 Pro feeder, the stack is loaded and the machine stops on its own for reloading: meanwhile your operator prepares the next run.

Overprintable soft-touch, our premium trick!

Laminate with soft-touch, reprint the design on the OKI, then run the stack again with a foil: foiling next to a velvet feel, across the whole run.

Format and throughput at a glance

The format, to scale

390 × 715 mm maximum format

320 × 450 mm an SRA3 sheet

225 × 320 mm an SRA4 sheet

From SRA4 cards to 715 mm long covers.

Accepted weight

Minimum 130 gsm

Maximum 400 gsm

Throughput, in sheets per minute

SRA4 46 sheets/min

SRA3 33 sheets/min

390 × 715 mm 20 sheets/min

Films and consumables

The films that give your prints their effect, and what completes your workshop.

Film

Laminates

Gloss, matt or soft-touch, corona-treated for overprinting.

Film

Metallic foils

Gold, silver, rose gold, copper, colours, black, white and clear gloss.

Film

Holographic films

Sparkle, crystal, carbon fibre: eye-catching effects.

Advice

Effects swatch book

To choose the effect with your customer before starting the run.

Complete your workshop

OKI Pro9431E printer

The SRA3 dry-toner printer that feeds the ColorFlare.

OKI Pro9541E printer

Clear toner for spot varnish, white for coloured media.

Vulcan SC-350 cutter

Automatic cutting and creasing of your laminated sheets.

Secabo SC30 II cutter

A3 cutting for short runs.

Laminating films and hot foils

All our films online.

All our finishing machines

Cutting, laminating, foiling.

Which ColorFlare for your production?

Desktop, manual feed

ColorFlare 400

240 kg electromechanical pressure, 330 mm width, board up to 350 gsm.

Semi-automatic production

ColorFlare 2000

One tonne of hydraulic pressure, timing gate, sheets up to 1,200 mm.

Automatic production

ColorFlare 2500 Pro

1,400-sheet air suction feeder, up to 2,000 SRA3 sheets per hour.

Key specifications

The essentials for lamination and foiling. Source: Intec CF2500 brochure (V1.1).

Maximum format 390 × 715 mm
Media and films 130 to 400 gsm; laminates and foils from 20 to 250 µm
Speed 1 to 15 m/min; 33 SRA3 or 46 SRA4 sheets per minute
Feeder dual front air suction, 280 mm stack (1,400 sheets), self-centring guides, auto stop for reloading
Sheet feeding automatic registration, adjustable overlap; pneumatic “burst” separation with micro-perforation wheel
Pressure adjustable hydraulic, up to 1 tonne (970 kg)
Rollers upper high-gloss chrome, oil-heated (130 °C max), lower silicone
Films dual unwind arm, 3″ (76 mm) cores, rewinder
Equipment 7-inch Info-Control touch screen, built-in compressor, adjustable de-curl, outfeed cooling fans, fold-away tray
Footprint and power 1,730 × 800 × 1,480 mm (W × D × H), 380 kg; 220-240 V, 50/60 Hz, 3,200 W

The foil only sticks to toner: your print file is all you need, with no plate or die. Full data sheet on request.

Laminated and foiled printed brochure

Why choose Digital-sys?

A machine has to be chosen, installed and mastered: we stay by your side at every step.

✓

Pre-sales advice

ColorFlare 2000 or 2500 Pro: the model chosen according to your volumes.

⚙︎

Installation and onboarding

Feeder set up, first stacks laminated and foiled with you.

★

Tests on your media

Your prints and papers tested before you commit.

☎︎

Local support

Laminates, foils and papers in stock, and a team that knows the whole workflow.

Your runs, laminated and foiled without you

Tell us about your jobs and volumes: we will propose the right ColorFlare and its pricing.

Request a quote

Photos are not contractual.

Reviews

You must log in to give a review

Log in

A unique experience

We are committed to offering you secure and customizable browsing. We use cookies for this purpose to provide you with offers tailored to your areas of interest, anonymously collect statistical data and make your visit as pleasant as possible. Google may use your personal data and cookies to personalize its advertisements