Intec ColorCut FB9550 Pro-T Automatic Digital Flatbed Cutter and Creaser with Five-Tool Head and 2,100-Sheet Feeder

  • Intec ColorCut FB9550 Pro-T
  • Intec ColorCut FB9550 Pro-T
Add to cart
  • Free shipping from 300 €*
  • Quick shipping in the whole world
  • Certified technical service Quick support
  • Custom advices & quotes Secured payment

FB9550-Pro-T

The flagship automatic cutter of the ColorCut range: load the stack and the FB9550 Pro-T cuts, creases and perforates on its own, from labels to corrugated board.

  • Five tools, three operations in one pass: cut + perforate + crease, or cut + crease + deboss.
  • Corrugated board up to 3 mm: 2.5 kg tangential knife, W1 and W2 wheels supplied.
  • 2,100-sheet vacuum feeder: suction cups, air blade, stainless steel fingers and jogging; next-sheet pre-placement.
  • Patented rear-side reading: creases fall on the right side of fluted board, with no printing on the back.

More info

Automatic cutting and creasing · 5 tools

Three operations in one pass, 2,100 sheets without you

Vacuum feeder, five-tool head and tangential knife: cutting, creasing, perforating and debossing non-stop, from labels to 3 mm corrugated board.

The flagship automatic cutter of the Intec T-Series, designed in the UK and supplied with ColorCut Pro 5 software.

Request a quoteSee the specifications

Intec ColorCut automatic flatbed cutter with sheet feeder

2,100

sheets in the feeder

5 tools

3 operations in one pass

3 mm

E, F, G and N corrugated board

530 × 740 mm

in the feeder

Automatic production, from labels to corrugated board

Five tools, a vacuum feeder and two rear-side cameras: the FB9550 Pro-T finishes what you print, on its own.

FB9550 Pro-T five-tool head

Five tools on one head

Two tangential and three passive tools: up to three operations in a single pass.

Tangential blade holder and 45° blade

Corrugated board up to 3 mm

2.5 kg tangential knife for E, F, G and N flutes.

FB9550 Pro-T sheet feeder and conveyor

A 2,100-sheet feeder

Suction cups, air blade, stainless steel fingers and jogging: the next sheet is already in place.

Rear-side mark reading cameras

Crease from the back

Two cameras read the marks on the reverse: the crease falls on the right side, with no double-sided printing.

What your customers will order

Four types of work, each with the Digital-sys products that make it possible.

Printed cartons, cut and creased

Carton and packaging runs

Hundreds of cartons creased and cut with no intervention between sheets.

Made with: OKI Pro9431E · Invercote G board

Corrugated box, cut and creased

Corrugated boxes

Tangential knife and creasing from the back, for boxes that fold the right way.

Made with: W1 and W2 wheels · 45° tangential knife

Round labels kiss-cut on their sheet

Kiss-cut labels

Label sheets in continuous runs, from thin self-adhesive paper to synthetics.

Made with: Vulcan Labelstock SRA3

Printed pop-up display, cut and creased

POS and displays

Cutting, creasing and perforating in one pass for displays and table tents.

Made with: OKI Pro9541E · hot foils

From file to finished piece, in four steps

With ColorCut Pro 5, cutting is prepared in Illustrator or CorelDRAW, the software your designers already use.

✎︎STEP 1 →

You design

One line colour per operation; the plug-in adds registration marks and a QR code.

⎙︎STEP 2 →

You print

On your sheet-fed printer, for example an OKI Pro9431E.

▣STEP 3 →

You load the feeder

Up to 2,100 sheets, portrait or landscape.

✂︎STEP 4

The FB9550 Pro-T cuts

Each sheet's QR code calls up the right cut file, even if the sheet is loaded the wrong way round.

Our experts’ view

Three operations, one pass!

Cut, perforate and crease, or cut, crease and deboss: the three head positions work in the same pass. Fewer passes, more pieces per hour.

On corrugated board, the crease on the right side!

The crease must fall towards the hollow of the flute. The two rear-side cameras read the marks with the sheet face down: no need to print the back.

Format and capabilities at a glance

The format, to scale

550 × 850 mm maximum media, manual placement

530 × 740 mm maximum media in the feeder

320 × 450 mm one SRA3 sheet, for comparison

In the feeder, from 197 × 285 to 530 × 740 mm, portrait or landscape.

Three speeds, depending on detail

High-definition mode 750 mm/s

Standard mode 960 mm/s

Fast mode 1,200 mm/s

Thickness handled

Paper and card 800 µm

Low-density media 1,000 µm

Corrugated board 3,000 µm

Tools and accessories

What comes with the FB9550 Pro-T, what you can add, and what completes your workshop.

Included

W1 and W2 wheels

E/F flutes and N flute/solid board; three widths and a perforating wheel as options.

Included

Passive tools

Narrow and wide ball creasers (also for debossing), blade holder and blades.

Included

Felt mat and vacuum

Replaceable mat, two-zone 750 W vacuum with silencer, compressor.

Option

Server Station

PC preinstalled with ColorCut Pro, Template Maker and Job Library Manager.

Complete your workshop

OKI Pro9431E printer

The SRA3 printer that feeds the FB9550 Pro-T.

OKI Pro9541E printer

5th colour, white or clear, for POS.

Vulcan Labelstock SRA3 self-adhesive paper

For kiss-cut labels.

Laminating films and hot foils

To personalise before cutting.

All our finishing machines

Cutting, laminating, foiling.

Which ColorCut for your production?

Manual · B1

ColorCut FB1190T

Large table, four tools, corrugated board up to 3 mm.

Automatic · 2 tools

ColorCut FB9500 Pro-T

2,000-sheet feeder, 2.5 kg tangential wheel, card up to 800 µm.

Automatic · 5 tools

ColorCut FB9550 Pro-T

2,100-sheet feeder, tangential knife, corrugated up to 3 mm.

Key specifications

The essentials for cutting and finishing. Source: Intec FB9550 Pro-T brochure.

Maximum media, auto-feed 530 × 740 mm (minimum 197 × 285 mm)
Maximum media, manual 550 × 850 mm
Usable cutting area 520 × 720 mm on auto-feed
Feeder 2,100 sheets (80 gsm), 25 kg, portrait or landscape
Head 5 tools: 2 tangential and 3 passive, up to 3 simultaneous operations
Force up to 2.5 kg (tools 1 and 2), 1.3 kg (tool 3)
Thickness 800 µm (paper, card); E, F, G, N corrugated board up to 3 mm
Speed 750 · 960 · 1,200 mm/s
Registration Vision3 CCD camera, QR code, two rear-side cameras
Software included ColorCut Pro 5, Direct and Held modes

One line colour per operation: cut, crease, perforate, kiss-cut. Full technical data sheet on request.

ColorCut Pro software

Why choose Digital-sys?

A machine has to be chosen, installed and mastered: we stay by your side at every step.

✓

Pre-sales advice

FB9500 Pro-T or FB9550 Pro-T: the model chosen according to your media and volumes.

⚙︎

Installation and onboarding

Feeder set up, plug-in installed, first runs cut with you.

★

ColorCut Pro training

QR codes, operation colours, automatic production.

☎︎

Local support

Blades, mats and papers in stock, and a team that knows the whole workflow.

Your packaging, in runs and unattended

Tell us about your volumes and boards: we will propose the right ColorCut configuration and a quote.

Request a quote

Photos are not contractual.

Reviews

You must log in to give a review

Log in

A unique experience

We are committed to offering you secure and customizable browsing. We use cookies for this purpose to provide you with offers tailored to your areas of interest, anonymously collect statistical data and make your visit as pleasant as possible. Google may use your personal data and cookies to personalize its advertisements