MARABU

MARABU Primer P4 for stainless Steel/Metal 1L Primer P4

  • MARABU Primer P4 for stainless Steel/Metal 1L
  • MARABU Primer P4 for stainless Steel/Metal 1L
Add to cart
  • Free shipping from 300 €*
  • Quick shipping in the whole world
  • Certified technical service Quick support
  • Custom advices & quotes Secured payment

MA-PRIM-P4

Glass, stainless steel and ceramics give a premium finish… as long as the UV ink stays on. Marabu Primer P4 prepares these smooth, non-absorbent surfaces so the print stands up to handling.

  • Markedly better adhesion of UV inks and coatings on glass, metals, ceramics and plastics.
  • Fast: dry in about 30 seconds, ready to print after 5 minutes.
  • Flexible: by cloth for one-offs, by spray gun for production runs.
  • A comfortable working window: up to 5 hours between application and printing.

More info

● ● ●  Marabu · Primer for UV inks · 1 L

Primer P4: UV prints that hold on glass, metal and ceramics

The Marabu adhesion promoter for UV digital inks, UV screen inks and UV coatings on smooth, non-absorbent substrates.

Glass · metals including stainless steel · ceramics · plastics — dry in 30 s, printable after 5 min · 1 L bottle.

Ask for an adhesion testUV printers for objects →

30 s

Thin-layer drying

5 min

Before printing

5 h

Printing window

1 L

Bottle

Primer P4 being applied to a stainless steel bottle

PHOTO 1 — P4 being applied to a stainless steel bottle or glass plate. No image on disk, to be supplied. Recommended size 900×900 px.

● ● ●  Premium substrates

A premium finish — as long as the ink holds

Stainless steel bottles, aluminium plates, glass bottles and trophies, ceramic tiles: these items show off a UV print, but their hard, smooth, closed surface gives the ink nothing to grip. Without preparation, cured ink can be scratched off with a fingernail or peel away in flakes.

Primer P4 strengthens the bond between the material and the printed layer, for UV digital inks, UV screen inks and UV liquid coatings.

● ● ●  Process

A short, controlled process

Before application
Substrate Dry, free of grease and fingerprints
Working temperature +15 to +25 °C
After application
Drying of a thin layer ≈ 30 s
Wait before printing ≈ 5 min
Printing window 5 h, away from sunlight
Beyond that Parts stored dry, protected from light

● ● ●  Application

By cloth or by spray gun

1

One-offs and short runs

By cloth

Lint-free cloth, clean paper towel or cotton pad. A thin layer over the whole surface, in circular movements, without pressing. Too much product leaves streaks: thinness is what makes the quality.

2

Runs and large surfaces

By spray gun

Compressed-air spray gun, 0.5 or 0.6 mm nozzle, around 4 to 6 bar depending on equipment. Airless is less suitable: it deposits too much product. Streaks on glass? Pressure too low or layer too thick. Use a booth or machine with extraction.

● ● ●  Applications

What P4 makes possible

Metal item UV-printed after Primer P4

PHOTO 2 — UV-printed metal item. To be supplied. Recommended size 900×675 px.

Metal and stainless steel

Bottles, travel mugs, pens, USB sticks, signs and machine plates.

Glass UV-printed after Primer P4

PHOTO 3 — UV-printed glass. To be supplied. Recommended size 900×675 px.

Glass and ceramics

Bottles, trophies, decorative panels, tiles and mugs. Technical plastics: after testing.

● ● ●  Choose well

P2, P4 or P5: which primer for your substrate?

Polyolefins

Primer P2

Substrates
PP, PE, metals, powder coatings

Inks
Marabu screen and digital, other inks

Application
Cloth

See Primer P2 →

You are here

Primer P4

Substrates
Glass, metals, ceramics, plastics

Inks
UV digital and screen inks, UV coatings

Application
Cloth or spray gun

Glass specialist

Primer P5

Substrates
Glass (specially developed for)

Inks
UV inks

Application
Cloth, spray gun or jetting

See Primer P5 →

● ● ●  Data sheet

Key specifications

Product
Type Liquid adhesion promoter
Compatible with UV digital inks · screen inks · UV coatings
Substrates Glass · metals · ceramics · plastics
Packaging 1 L bottle
Marabu reference 351497024
Processing
Drying / wait before printing ≈ 30 s / ≈ 5 min
Printing window 5 h
Temperature +15 to +25 °C
Spray gun 0.5–0.6 mm nozzle · 4–6 bar
Safety
Flash point 12 °C — flammable

P4 contains a high proportion of adhesive component: always test on the actual substrate and ink before a production run.

● ● ●  What Digital-sys adds

Glass, stainless steel, ceramics: let’s validate your substrate before the run.

01The right primer — we help you choose between P2, P4 and P5 for your material and ink.

02A test before you commit — send us a sample of your item and we’ll validate adhesion with you.

03Stock in Belgium — primers, UV inks and cleaning products delivered fast.

04The whole UV chain — UV flatbed printers for objects, inks, primers and training: one single partner.

Ask for advice or an adhesion test

Photos for illustration only. Technical data: Marabu documentation.

Reviews

You must log in to give a review

Log in

A unique experience

We are committed to offering you secure and customizable browsing. We use cookies for this purpose to provide you with offers tailored to your areas of interest, anonymously collect statistical data and make your visit as pleasant as possible. Google may use your personal data and cookies to personalize its advertisements